phone:联系人:
13714630748（白先生）
屏幕修复专线：13145848466（潘生）
fax:0755-85279156
mailbox:ckdseiki@126.com
address:Meicheng Industrial Park, Langjing Road, Dalang Street, Longhua District, Shenzhen
Winter has arrived, laser anti-freezing measures to do
2022-12-15
Winter has arrived, laser anti-freezing measures to do with the arrival of cold air cooling in December,
The winter song begins
Shenzhen Chuangkeda Precision Electromechanical Co., LTD.,
Remind the families who buy our equipment, as long as they pay attention to keep warm and cold,
Also pay attention to our laser equipment anti-freezing oh!
-
Frost prevention guide
Frost prevention guide
It is well known that when the ambient temperature is below 0℃, the water in the pipe circuit used for cooling freezes,
Ice volume expansion may crack laser, laser head, water cooler pipes, joints,
And other core components, causing heavy losses.
In order to avoid this situation, we share a few guidelines for laser equipment anti-freezing maintenance:
01 Turn on the air conditioner or heating system
If conditions permit, you can always turn on the air conditioner or heating system to ensure that the ambient temperature of the device is above 0 ° C. Water does not freeze when the temperature is higher than 0 ° C.
02 Keep the chiller running
When not in use at night, the chiller can be kept running so that the water will not freeze when flowing under high pressure.
03 Drain water from the device
If the device (such as the laser, water chiller, or laser head) is not used for a long time, drain all the water from the device, and use air or nitrogen to dry the remaining water. If there were no water, there would be no ice.
04 Add antifreeze
Adding antifreeze to the water can effectively prevent the water from freezing.
-
How lasers drain water
How lasers drain water
Remove the water inlet/outlet pipe of the laser, let the water flow out, and use compressed gas to aerate the water inlet until the water in the laser pipe is completely discharged from the water outlet. The water inlet/outlet of the laser is shown in the figure below. (Be sure to clean it)
-
Precautions for using antifreeze solution
Precautions for using antifreeze solution
01 Cannot be used for a long time
Antifreeze can not be used for a long time. It will deteriorate for a long time. Therefore, after the weather warms up, be sure to discharge it, and clean the pipeline, and change back to ionic water.
02 Produce chemical reactions
Different brands or different varieties of antifreeze can not be mixed with different brands of antifreeze chemical composition is different, after mixing may occur chemical reaction, loss of antifreeze effect and pollution residue after the reaction.
03 Brand and proportion
Antifreeze Brand and Ratio Recommendations CLARIANT Antifrogen-N glycol water antifreeze is recommended
The proportion of antifreeze and water can be determined according to the temperature environment in different areas:
In addition, still want to remind you, even if has done the above processing, still can not be taken lightly oh. To check more, more attention to prevent the laser from being damaged!
-
To learn more, save the picture on Douyin and scan it at ！！！！
